University of Tasmania
Browse

Application of a novel deep eutectic solvent modified carbon nanotube for pipette-tip micro solid phase extraction of 6-mercaptopurine

Download (2.12 MB)
journal contribution
posted on 2024-09-09, 04:44 authored by Leila Raisi, Sayyed Hossein Hashemi, Ahmad Jamali Keikha, Massoud KaykhaiiMassoud Kaykhaii
BACKGROUND: 6-mercaptopurine (6-MP) is a chemotherapy drug mainly used to treat leukemia. It is a persistent organic pollutant and can remain in the environment for a long period of time. The presence of 6-MP in the environment poses a number of hazards and needs to be assessed to monitor its potential risk to human health and the environment. However, due to its trace amount in complicated matrices, a clean-up and preconcentration step before its determination is compulsory. RESULTS: As a highly efficient adsorbent for the extrication of 6-mercaptopurine (6-MP), a novel carbon nanotube doped with camphor: decanoic acid deep eutectic solvent was synthesized and applied as a packing material for the pipette-tip micro solid phase extraction sorbent of 6-MP from tap, wastewater and seawater samples before its spectrophotometric determination. Characteristics and structure of this adsorbent was fully investigated. Factors affecting extraction, including type and volume of the eluent, ionic strength and pH of the sample solution, amount of adsorbent, and number of extraction and elution cycles were optimized using one-factor-at-a-time and response surface methodologies. The method was found to be linear in the range of 1 to 1000 µg/L with a limit of detection and quantification of 0.2 and 0.7 µg/L, respectively. Reproducibility as relative standard deviation was better than 4.6%. CONCLUSION: Application of deep eutectic solvent modified carbon nanotube indicated suitable microextraction results and good potential for rapid extraction of trace amounts of 6-MP from different aqueous samples. The amount of sample required for the analysis was less than 10 mL and only 1.5 mg of the adsorbent was used. The total analysis time, including extraction was less than 15 min and the adsorbent could be used for at least 10 times, without significantly losing its adsorption ability. Compared to using unmodified usual carbon nanotubes, deep eutectic solvent doped carbon nanotubes showed 19.8% higher extraction ability.

History

Sub-type

  • Article

Publication title

BMC CHEMISTRY

Volume

18

Issue

1

Article number

ARTN 81

Pagination

10

eISSN

2661-801X

ISSN

1864-6158

Department/School

Chemistry

Publisher

BMC

Publication status

  • Published

Place of publication

Switzerland

Rights statement

© The Author(s) 2024. Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http:// creat iveco mmons. org/ licen ses/ by/4. 0/. The Creative Commons Public Domain Dedication waiver (http:// creat ivecommons. org/ publi cdoma in/ zero/1. 0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.